Set Up Archy Credit Card Terminal: Castles

To set up your Castles credit card terminal you only need to follow the prompts on the terminal.

If prompted for a pin code you can find your unique pin in your Archy payment terminal settings page.

Power On/Off the Terminal

If the payment terminal is turned on for the first time or after it was off for a long time, it may need to check for updates which can take 10 to 20 minutes.
💡 Note: While the terminal is updating, the screen may flash or appear to turn off. Once the update is done, the screen should turn on.

When you first receive the device, it should come partially powered up. Use the supplied wall charger to begin charging the device to full power.

Turn on the Terminal

Once charged for at least 30 minutes, press and hold the power button until the display turns on. If necessary, connect the terminal to a power supply to charge the battery. Once the device is powered on, pressing the power button once will sleep/wake the device.

Turn off the Terminal:

Press and hold the power button until a dialog box appears, then confirm you want to turn off the terminal.

💡 Note: Ideally the terminal should be powered off each evening and powered on each morning to receive automatic software updates.